Tabletop Tyrant

Quick viewAdd to wishlist

The Dreadnought Army Figure Case XL - Standard Loadout

The Dreadnought XL quadruple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pockets for books and accessories. There is also an insidepocket for army books or rulebooks.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.This variant comes with 5 layers of 25mm deep infantry foam, 2 layers of 35mm infantry foam, a 60 mm pluck, a 75mm pluck, a 100mm pluck and a cover tray. That means you can hold 24 tanks or monsters, 252 infantry a rulebook, your army books, templates, dice and more!Please note all foam trays are now supplied in the classic dark grey colour scheme.The size of this bag is 15" wide x 12" deep x 20.5" tall (38 x 30 x 52 cm)Please note any models pictured are for display purposes only and are not included with the case.Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$199.95
Quick viewAdd to wishlist

Dreadnought Army Figure Case XL - Infantry Division & Support Vehicles Loadout

The Dreadnought XL quadruple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pockets for books and accessories. There is also an insidepocket for army books or rulebooks.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.This variant comes with the following;7 layers of 25mm deep light infantry foam (each hold 40 infantry)2 layers of 50mm heavy support traysTwo layers of 75 mm deep pluck traysThat means you can hold around 6-8 tanks or monsters, 280 infantry, 24 support weapons or larger models, a rulebook, your army books, templates, dice and more!The light infantry trays hold 40 slots, are 25mm deep and have a compartment size of 25 x 50mmThe Heavy support trays are 50mm deep and the compartment size is60 x 70mmThe "pick and pluck" design guides you for fitting in a variety of models or items. Simply remove the squares of foam you do not require and make a perfect fit for the items you need storing.Please note any models pictured are for display purposes only and are not included with the case.The size of this bag is 15" wide x 12" deep x 20.5" tall (38 x 30 x 52 cm)Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$199.95
Quick viewAdd to wishlist

Build Your Own -Dreadnought Army Figure Case XL

Please note the foam depths in the Build Your Own includes a 6mm bottom tray, which is glued to the bottom. For example, the 25mm tray is 31 mm in the size section including the bottom tray.The Dreadnought XL is a quadruple-size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pocket for rulebooks, an insidepocket for army books or rulebooks and additional front pockets.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water-resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a zip-top, sewn handles and a shoulder strap.This variant comes with your selection of foam.The size of this bag is 15" wide x 12" deep x 20.5" tall (38 x 30 x 56 cm)Free Shipping on orders over $60.

$199.95
Quick viewAdd to wishlist

Build Your Own Dreadnought Backpack Figure Case

The Dreadnought backpack triple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.To ensure you are comfortable when carrying your miniatures the backpack comes with padding on the shoulder straps and backrest.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pocket for rulebooks, an insidepocket for army books or rulebooks and additional front pockets.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.This variant comes with your selection of foam.The size of this bag is 15" wide x 12" deep x 16.5" tall (38 x 30 x 42 cm)Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$185.95
Quick viewAdd to wishlist

Dreadnought Backpack Figure Case - Warhammer, AOS and 40K Loadout

The Dreadnought backpack triple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.To ensure you are comfortable when carrying your miniatures the backpack comes with padding on the shoulder straps and backrest.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pocket for rulebooks, an insidepocket for army books or rulebooks and additional front pockets.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.Please note any figures shown are just for reference and not included.This variant comes with the following foam;4 x Infantry Trays 35mm deep (Each holds 36 models with a compartment size of 50 x 32 mm)1 x 50 mm deep Elite Infantry Tray (Holds 25 Models with a compartment size of 60 x 40mm)1 x Primaris Infantry tray 50 mm deep ( Holds 80 x 50 mm x 6, 60 x 50 mm x 3 & 32 x 60 mm x 16)1 x 75mm Deep Pick and Pluck Tray. The "pick and pluck" design guides you for fitting in a variety of models or items. Simply remove the squares of foam you do not require and make a perfect fit for the items you need storing.The size of this bag is 15" wide x 12" deep x 16.5" tall (38 x 30 x 42 cm)Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$185.95
Quick viewAdd to wishlist

The Dreadnought Army Figure Case - Standard Loadout

The Dreadnought triple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pocket for rulebooks, an insidepocket for army books or rulebooks and additional front pockets.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.This variant comes with 6 layers of infantry foam 25mm deep, one 60 mm and one 100mm vehicle tray. That means you can hold up to 16 tanks or monsters, 216 infantry a rulebook, your army books, rulebook, templates, dice and more!Please note all foam trays are now supplied in the classic dark grey colour scheme.The size of this bag is 15" wide x 12" deep x 16.5" tall (38 x 30 x 42 cm)Please note any models pictured are for display purposes only and are not included with the case.Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$149.95
Quick viewAdd to wishlist

Build Your Own Dreadnought Army Figure Case

The Dreadnought triple size army figure case is a durable black material case with each surface reinforced with 3mm plastic panels to ensure your miniatures are protected.As well as the extra armour the dreadnought also comes with side pocketsfor templates and dice, a front pocket for rulebooks, an insidepocket for army books or rulebooks and additional front pockets.The Dreadnought case is orientated so that trays stackhorizontally for extra protection for your miniatures. As well as thetop opening, a side panel also opens out so trays are easier toreach and stack.Water resistant and specially designed to fit classic G.W. trays aswell as the Tabletop Tyrant range of trays. The case comes with a ziptop, sewn handles and a shoulder strap.This variant comes with your selection of foam.The size of this bag is 15" wide x 12" deep x 16.5" tall (38 x 30 x 42 cm)Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$149.95
Quick viewAdd to wishlist

Tyrant Army Figure Case - Hold up to 288 models

The Tyrant Army Figure Case MK 3 is a lightweight and durable black material case.The Tyrant has been orientated so that trays stack horizontally for extra protection for your miniatures. As well as the top opening, a side panel also opens out, so trays are easier to reach and stack. The case is water-resistant and specially designed to fit the classic G.W. trays (found in their older figure and army cases) as well as the Tabletop Tyrant range of trays. The case comes with a zip-top, sewn handles, a shoulder strap, and heavy-duty buckles.We have improved the plastic battle armour of the tyrant so that all 6 faces of the case are protected. This new version of the tyrant also comes with side pockets for templates and dice, a front pocket for rulebooks and an inside pocket for army books or rulebooks.Please note any models shown in the tray are for reference only and not included with the case.LoadoutsThe standard loadout contains 6 x 28mm deep infantry trays and 1 x 60mm deep pick and pluck tray. This gives a combined capacity of 216 infantry plus 6 medium tanks or monsters.The compartment size of the infantry trays is 50 x 32 mmThe Infantry loadout comes with 8 x 28mm deep infantry trays.The pluck loadout comes with a 100mm, 75mm, and a 60mm pick and pluck tray.The EMPTY version comes without foam. Dimensions of the Infantry TraysL = 365mm W = 270mm Height = 34mm (including bottom pad)14.6" x 11.2" x 1.28"Dimensions of the Pick and Pluck TrayL = 365mm W = 270mm Height = 66mm (including bottom pad)The size of the removable pick and pluck squares are 20 x 20 cm.Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example, the 25mm tray is 31 mm tall including the bottom tray.

$145.95
Quick viewAdd to wishlist

Tyrant Army Figure Case inc Foam - 40K, AOS and Warhammer Loadout

The Tyrant Army Figure Case MK 3 is a lightweight and durable black material case.The Tyrant has been orientated so that trays stack horizontally for extra protection for your miniatures. As well as the top opening, a side panel also opens out so trays are easier to reach and stack. The case is water resistant and specially designed to fit the classic G.W. trays (found in their older figure and army cases) as well as the Tabletop Tyrant range of trays. The case comes with a zip top, sewn handles, a shoulder strap and heavy-duty buckles.We have improved the plastic battle armour of the tyrant so that all 6 faces of the case are protected. This new version of the tyrant also comes with side pockets for templates and dice, a front pocket for rulebooks and an inside pocket for army books or rulebooks.Please note any models shown in the tray are for reference only and not included with the case.Our trays are 355 mm in length and 270 mm in width. The depth depends on the type of tray and the stated depth does not include the glued on bottom tray.The 40K, AOS and Warhammer Loadout comes with 3 x 35 mm deep infantry trays, 1 x 50mm deep infantry tray and one 75mm deep pick and pluck.Types of TraysThe Elite tray holds 25 larger based models ideal for 40 mm based models. The compartment size is 60 mm x 40mm. The tray is 50 mm deep.The infantry trays hold 36 models. The compartment size is 50 x 32 mm The tray is 35 mm deep.The "pick and pluck" design guides you for fitting in a variety of models or items. Simply remove the squares of foam you do not require and make a perfect fit for the items you need storing. The tray is 75 mm deep.Free Shipping on orders over $60.Please note our foam depths do not include a 6mm bottom tray, which is glued to the bottom. For example the 25mm tray is 31 mm tall including the bottom tray.

$145.95